9999 in stock.
QTY:
Brand: XUANXING
Simplified: Relearn OBD Relearn VERSION
Sensor quality: High Quality
Placement on Vehicle: Front, Left, Rear, Right
Type: TPMS Tire Pressure Sensor
Manufacturer Part Number: PMV-C015 42607-06030
Interchange Part Number: 4260706030 42607-0E020 426070E020 4260733050 42607-33050, 42607-F4010 42607F4010
Color: Black
Frequency: 315 Mhz
ITEM Included: 4PCS
Weight: 40g each
Fitment:
For Lexus
ES Series 2018 (models manufactured after August 2018 only)
ES Series 2019-2023 (all)
GX Series 2020-2022
IS Series 2021-2023
LC Series 2017-2022
LS Series 2018-2022 (models with direct pressure readout only*)
LX Series 2016 (models manufactured after September 2015 only)
LX Series 2017-2023 (all)
NX Series 2022-2023 (models with 315MHz sensors only)
RC Series 2020-2022
RX Series 2015-2022
UX Series 2019-2022
For Toyota
4Runner 2020-2023
Avalon 2016-2022
bZ4x 2022-2023
C-HR 2017-2022
Camry 2014-2019 (models with direct pressure readout only*)
Camry 2020-2022 (models with alloy wheels only)
Corolla 2019 (models with direct pressure readout only*)
Corolla 2020-2022 (models with alloy wheels only)
GR86 2022-2023
Land Cruiser 2016-2021
Prius 2019 (models with direct pressure readout only*)
Prius 2020-2022
Rav4 2019-2022 (models with Smart Key only^)
Sequoia 2020 (models with Pacific sensors only)
Sequoia 2021-2022 (all)
Tacoma 2016-2022 (models with alloy wheels only)
Tundra 2020-2021 (models with alloy wheels and Pacific sensors only)
Tundra 2022 (all)
Installation Process:
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.