10000 in stock.
QTY:
Brand: XUANXING
Simplified: Relearn OBD Relearn VERSION
Sensor quality: High Quality
Placement on Vehicle: Front, Left, Rear, Right
Type: TPMS Tire Pressure Sensor
Manufacturer Part Number: PMV-107J 42607-30012
Interchange Part Number: 42607-06011, 42607-0E011, 42607-35040, 4260706011, 4260733011, 4260733022, 4260735040, 42607-33022
Color: Black
Frequency: 315 Mhz
ITEM Included: 4PCS
Weight: 40g each
Fitment:
For Toyota:
For 2004-2016 Toyota 4Runner
For 2007-2011 Toyota Camry
For 2007、2008、2010-2013 Toyota Corolla
For 2007-2014 Toyota FJ Cruiser
For 2008-2013 Toyota Highlander
For 2005-2015 Toyota Land Cruiser
For 2007-2009/2011-2014 Toyota Prius
For 2012-2016 Toyota Prius V
For 2014-2015 Toyota Prius Plug-In
For 2006-2012 Toyota Rav4
For 2005-2006 Toyota Tundra
For 2005-2007 Toyota Sequoia
For 2007-2012 Toyota Avalon
For 2007-2013 Toyota Matrix
For 2007-2008 Toyota Solara
For 2006、2007、2009-2015 Toyota Tacoma
For 2009-2015 Toyota Venza
For 2009-2011 Toyota Yaris
For Lexus:
For 2011-2016 Lexus CT200h
For 2007-2012 Lexus ES350
For 2006 Lexus GS300 (2006 please verify with your VIN)
For 2007-2011 Lexus GS350
For 2007 Lexus GS430
For 2008-2011 Lexus GS460
For 2007-2011 Lexus GS450h
For 2010-2016 Lexus GX460
For 2005-2009 Lexus GX470
For 2008-2014 Lexus IS F
For 2006-2015 Lexus IS250 (2006 please verify with your VIN)
For 2006-2015 Lexus IS350 (2006 please verify with your VIN)
For 2007-2012 Lexus LS460L
For 2008-2012 Lexus LS600hL
For 2005-2007 Lexus LX470
For 2008-2015 Lexus LX570
For 2006 Lexus RX330 (2006 please verify with your VIN)
For 2007-2015 Lexus RX350
For 2006-2008 Lexus RX400h (2006 please verify with your VIN)
For 2010-2015 Lexus RX450h
For 2007-2010 Lexus SC430
For MERCURY
For 2012-2015 Scion iQ
For 2007-2016 Scion tC
For 2008-2015 Scion xB
For 2008-2014 Scion xD
Installation Process:
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.